|
246
|
20W Diode laser system at 808 nm
|
Opto-Power
|
OPC-A015-808-FCPS
|
2 years, used 50h
|
Excellent |
|
|
Specifications: The system is standalone. It includes the power supply, control unit and output fibers. The output consists of one fiber bundle of 4 m long, which separates in four fibers of 1 m each. Each of the four fibers are terminated with a SMA connector. Each of the four fibers delivers 5W at 808 nm (the system is rated 20W). The wavelength and power are stabilized.
The system was purchased in 1999, but was used only 50 hours because the project was cancelled. The system is rated 10'000 hours.
|
|
1061
|
Air Bearing Spindle
|
Block Head
|
4B
|
Rebuilt
|
Very Good |
|
|
Specifications: Two Available. Specs for this model: (at 150 psi) Load Capacity Ultimate: Radial 100 lbs, Axial 400 lbs, Tilt 400 lb-in. Stiffness: Radial 0.67 lb/microinch, Axial 2.0 lb/microinch, Tilt 4.0 lb-in/microradian, Error Motion: Radial < 1 microinch, Axial < 1 microinch, Tilt < 0.1 microradian. Total wgt 18 lbs, Rotor wgt 7.7 lbs, Rotor Inertia 0.73 oz-in-sec2, Max Speed 10,000 rpm, Air Consumption <2 scfm. Rebuilt some years ago. Reported in Excellent Condition and ready to use. Stored in temperature controlled enviornment and in sealed containers.
|
|
933
|
Alignment Cube
|
COC
|
AC
|
|
Very Good |
|
|
Specifications: Master 90 degrees Reference. Five, full aperture faces. Adjustable base, 80 T.P.I screws. One arc-second accuracy. 1.5 inch cube. Used to establish precision right angles and multiple orthogonal lines-of-sight in lab or field. The five surfaces, flat to 0.05 wave, are aluminized and protective overcoated.
|
|
1143
|
Degreaser
|
Baron Blakeslee
|
MLR 120
|
unkn
|
Good |
|
|
Specifications: Heated vapor degreaser, ID 21" x 24", 2 bays 12" x 10.5".
|
|
1076
|
Delta F PLATINUM SERIES OXYGEN ANALYZER
|
Delta F
|
#FAH0500
|
7
|
Excellent |
|
|
Specifications: Delta F PLATINUM SERIES OXYGEN ANALYZER #FAH0500
These are new open box, all paper work included. Certificate of compliance.
Factory can upgrade these units to the model FAH0050, with 3 ppb detect, +/- 25 ppb accuracy. Contact Delta F to confirm and for pricing.
|
|
420
|
Diamond Tooling
|
|
|
|
Excellent |
|
|
Specifications: Approx 125 Diamond Tools from 10mm to 125mm.
|
|
882
|
Diamond Wheels & Adapter
|
Norton Abrasives
|
|
|
Excellent |
|
|
Specifications: Diamond wheels for #18 Blanchard. 2AT 18 x 7/8 x 16 1/2 ME 73188 SD220-R75B99E and SD100-R50B99E. Two new unused wheels still in box. One wheel mounted on adapter. Three total wheels plus adapter.
|
|
642
|
Laser
|
Melles Griot
|
|
2001
|
Excellent |
|
|
Specifications: 488nm 50mW CW Argon Ion laser. Laser head: Model 543R-BS-A01, Manufactured in 09/01, Refurbished 5/23/02 with new tube. Power Supply: Model 176B-208B. Air Cooled. Unused.
|
|
877
|
Laser Beam Expander
|
SORL
|
COAR 20X05
|
1990
|
|
|
|
Specifications: Laser beam expander with a 4" diameter off axis parabolic primary mirror. Secondary mirror is 1" diameter. Manufacturer specs for the 20 x 05 model are: Input diameter: 5mm, Output diameter: 100mm.
|
|
1021
|
Manual
|
AIT Industries
|
360 and 360A
|
1988
|
good |
|
|
Specifications: Operation and maintenance Instructions for the Mark IV Deluxe Bevel Edgers. Installation, Operation, Maintenance, Troubleshooting, Repair. Includes drawings and part numbers
|
|
810
|
Manual
|
Strasbaugh
|
6DA-DC
|
2000/2001
|
Excellent |
|
|
Specifications: Operations and Maintenance Manual for the 6DA-DC Precision Polishmaster. Complete with Installation, Safety, Operator functiions, Machine Setup, Preventive Maintenance Schedules, Maintenance Adjustments, Assembly Drawings, Parts List, etc.
|
|
859
|
Mirror
|
Nikon
|
Polygon
|
|
Excellent |
|
|
Specifications: Polygon mirror with 8 divisions 45 degrees apart.
|
|
857
|
Mirror
|
Nikon
|
Plane
|
|
Very Good |
|
|
Specifications: Plane Mirror in Very Good Condition.
|
|
69
|
Pellicle Beam Splitter
|
Coated
|
New
|
|
Excellent |
|
|
Specifications: 2" Pellicle Beam Splitters Coated 40% reflection and 40% transmission in the visable.
|
|
67
|
Pellicle Beam Splitter
|
Coated
|
New
|
|
Excellent |
|
|
Specifications: 1" Pellicle Beam Splitters Coated 40% reflection and 40% transmission in the visable.
|
|
68
|
Pellicle Beam Splitter
|
Uncoated
|
New
|
|
Excellent |
|
|
Specifications: 2" Pellicle Beam Splitters 10% reflection and 90% transmission in the visable.
|
|
66
|
Pellicle Beam Splitter
|
Uncoated
|
New
|
|
Excellent |
|
|
Specifications: 1" Pellicle Beam Splitters 10% reflection and 90% transmission in the visable.
|
|
936
|
Plane Parallel Mirror
|
Davidson
|
D-616
|
|
Very Good |
|
|
Specifications: In adjustable mount with case, parallel to better than 1 sec.
|
|
938
|
Polygon 8 sided
|
Starrett Webber Gage
|
|
|
Very Good |
|
|
Specifications: For checking & calibrating angles. Grade 2, Solid Cboblox (Chrome-Carbide), in wood case.
|
|
858
|
Prism
|
Nikon
|
Pentagon
|
|
Excellent |
|
|
Specifications: Pentagon Prism. Aprox 4" diameter overall. The faces have an aperture that is approx 1.5" wide and 3/4" high. Angles are marked in 45 degree increments below each aperture. No certs although still shown on Nikon website.
|
|
1001
|
Pump and Controller
|
Balzers
|
TPH-510 TCP-300
|
|
|
|
|
Specifications: Turbo Pump and Controller as pictured.
|
|
564
|
Reference Flat
|
Zygo
|
|
|
Excellent |
|
|
Specifications: 4" 90% Reference Flat. With Case and interferogram.
|
|
732
|
Rotary Table
|
|
|
|
Good |
|
|
Specifications:
|
|
1129
|
Sonic Mill
|
the Bell Group
|
Autopac II B
|
Unknown
|
Very Good |
|
|
Specifications: Stationary Sonic Mill. Branson generator 900BCA.
|
|
997
|
Spindle
|
GMN LOH
|
TS 35
|
|
Good |
|
|
Specifications: As pictured and marked: #12. du x 150 R255511
|
|
884
|
Spindle
|
LOH
|
WG
|
|
Very Good |
|
|
Specifications: Marked: TS 42x200 GMN TEMPO LOH WETZLER
|
|
998
|
Spindle
|
LOH
|
UNKN
|
|
Good |
|
|
Specifications: As pictured and marked: # 13. Model number is worn off.
|
|
995
|
Spindle
|
LOH
|
ZS 42 x 100
|
|
Fair |
|
|
Specifications: As pictured and marked: #8. du 5. Doesn't spin but owner thinks it can be freed up.
|
|
993
|
Spindles
|
LOH
|
ZS 42 x 100
|
|
Good |
|
|
Specifications: As pictured and marked: #1. du 075, #2. du 4, #3. du 076, #4. du 2, #5. du 3.
|
|
996
|
Spindles
|
LOH
|
ZS 35
|
|
Good Fair |
|
|
Specifications: As pictured and marked: #9. du x 150 103, #10. du x 150 101 (keyway has a chip in it seen in photo). #11. x 150 du 13.
|
|
927
|
Sputtering Power Supply
|
ENI
|
DCG-200 Slave
|
7 years
|
Excellent |
|
|
Specifications: 20KW slave sputtering supply to add another 20 kilowatts of power to a DCG-200 master. Model # DC228-A022000 10
|
|
314
|
Substrate Centering System
|
FAS Technologies
|
|
3 Years
|
Excellent |
|
|
Specifications: System is Brand New, never used. Designed to receive & center standard 600 x 600 mm substrates (held by 6 vacuum chucks)& prepare them to be automatically loaded into a process tool. Receiver mechanism & a control box. Receiving mechanism centers by use of two centering arms w/fingers, located diagonally at opposite corners & six substrate pads, which raise & lower the substrate into position. Self contained. Cables and manuals included. Dims: 41"x32"X 54" tall.
|
|
1074
|
SVG/ASML Beam Delivery Tube
|
SVG/ASML
|
Beam Delivery Tube
|
|
Excellent |
|
|
Specifications: New in the original shipping crate beam delivery tube for SVG/ASML equipment, we cut the plastic open to have a look.
We have 2 of these that appear to be new in original shipping
crate, we're unable to find a part number at this time.
|
|
1075
|
SVG/ASML Laser condenser unit
|
SVG/ASML
|
SVG/ASML #921-0034-001
|
|
Excellent |
|
|
Specifications: Laser condenser unit, SVG/ASML #921-0034-001
|
|
970
|
Table
|
Newport
|
NRC
|
unkn
|
Good |
|
|
Specifications: Two tables, each 4' x 10' x 8". Can be bolted together for one 20' long table. There are some tapped holes in the tables but they are, for the most part, solid.
The power strips along the side (yellow & black) are not included. Includes 8 legs. Prefer to sell as a set.
|
|
1145
|
Temperature Humidity Chamber
|
Thermotron
|
SM-8C
|
Unkn
|
Good |
|
|
Specifications: Temp Range -110F to + 350F (-73.3C to +177C), Humidity Range 20% to 95%. 24"x24"x24", Watlow F4 and 94 series controllers, Chart Recorder.
|
|
1128
|
Thermal Press
|
Sonitek
|
TS500
|
unkn
|
Very Good |
|
|
Specifications: S/N 500-0382. Multi zone. As Pictured.
|
|
945
|
Thermal Shock Chamber
|
Ransco
|
7103-1
|
1987
|
Fair |
|
|
Specifications: 18X18X18" -70 to 200 degrees C, Honeywell Circlegraph Recorder, Watlow controller, SAMI II Service & maintenance Indicator, Viewing window. Water cooled. Needs compressor.
|
|
1073
|
Zygo Laser Head - SVG/ASML #923-0071-003-01
|
Zygo
|
SVG/ASML #923-0071-003-01
|
|
Very Good |
|
|
Specifications: Qty 2, SVG/ASML OEM Zygo Laser Head, Pulled from like new equipment. SVG/ASML #923-0071-003-01
|
|
1072
|
Zygo Laser Head 3mm #SER1207
|
Zygo
|
7702T S/N 00-26-S009
|
7
|
Very Good |
|
|
Specifications: Like new Zygo Laser Head, pulled from like new SVG/ASML equipment.
|
|
1070
|
ZYGO MODEL 7712 LASER HEAD
|
Zygo
|
P/N 8070-0159-04
|
|
Excellent |
|
|
Specifications: NEW-OPEN BOX ZYGO MODEL 7712 LASER HEAD P/N 8070-0159-04
|
|
1071
|
ZYGO ZMI 2002 DUAL AXIS MEASUREMENT BOARD 6U VME
|
ZYGO
|
ZYGO ZMI 2002
|
|
Excellent |
|
|
Specifications: Like new opened for inspection and probably incoming test.
|
|
